Beschreibung

A quiet arc of brass, a soft drum of light.

Elevate your sanctuary with the Alexa Wall Lamp, a masterpiece of refined design and timeless materials. Featuring a gracefully arched brass stem that culminates in a soft, cylindrical fabric shade, this piece bridges the gap between classic artistry and modern minimalism. The warm glow filtered through the premium white fabric creates an intimate atmosphere, perfect for bedside reading or adding a touch of sophisticated brilliance to your hallway. More than just a light fixture, the Alexa is a statement of taste.

One Silhouette

A single, considered proportion

Wall-Mounted

The Alexa

∅ 5.9″ × W 15″ × H 26.8″

DIA 15 × W 38 × H 68 CM

The Make

Two honest materials

Brass

Solid brass arm and wall plate, drawn into a single arched stem and finished in warm bronze.

Fabric

Premium ivory-white fabric drum, lined to diffuse light into a soft, parchment-warm glow.

Finishes

Bronze Brass White Fabric

The Particulars

Full specification

Materials

Brass · Fabric

Finish

Bronze (frame) · White (shade)

Lampshade

White Fabric — cylindrical drum

Bulb Base

E12 / E14 — bulb not included

Voltage

AC 110 – 240 V

Wiring

Hardwired

Dimensions

∅ 5.9″ × W 15″ × H 26.8″
(Dia 15 × W 38 × H 68 cm)

Suited For

Bedside Reading · Hallways · Living Rooms · Studies · Sitting Areas

Certification

North America Europe Australia Saudi Arabia

Good to know

Bulb sold separately — fits a candelabra E12 or E14 base; we recommend a warm-white bulb of 40 W or less to flatter the fabric shade. Hardwired install by a qualified electrician; intended for indoor placement, away from direct moisture.

Frequently Asked

Before you order

Where in the room does the Alexa work best?

The long brass arc extends about 15″ (38 cm) from the wall and angles the shade slightly downward — designed first for bedside reading beside a headboard, but equally at home flanking a sofa, lighting a hallway alcove, or framing a vanity. Because it’s hardwired and not articulated, choose its placement with the throw of light in mind: it casts forward and down, not up.

How high should it be mounted, and can a pair be hung either side of a bed?

For bedside reading, mount the wall plate roughly 50 – 55″ (127 – 140 cm) from the finished floor — this puts the shade just above shoulder height when seated against the headboard. For a balanced pair, place the two plates the width of the nightstands apart and at exactly the same height. Add two units to your order to coordinate.

Does it require an electrician to install?

Yes. The Alexa is hardwired onto a standard wall-box junction — there is no plug-in cord. A qualified electrician will mount the brass plate, connect line / neutral / ground, and seat the fixture in under an hour. If your wall doesn’t have an existing junction box at the desired height, factor in basic wiring work alongside the install.

What bulb does it take, and is it dimmable?

A candelabra E12 or E14 base bulb, 40 W maximum, sold separately. We recommend a warm-white LED filament at 2700 K — it keeps the white fabric shade reading as soft ivory rather than cool. The fixture itself works with standard switches; for dimming, pair a dimmable LED with a compatible dimmer at the wall.

Can the brass arm be adjusted or repositioned?

No — the arc is fixed. Its silhouette is the design, hand-bent in solid brass to a single continuous curve. The shade direction is set by the geometry of the arm, which is why the lamp is best chosen with its throw of light in mind from the outset.

How is the white fabric shade cared for?

A soft, dry brush or a lint roller is enough for routine care. For occasional touch-ups, lightly dab with a barely damp white cloth and let it air-dry fully before powering back on. Avoid solvents and direct moisture. Used with an LED bulb at 40 W or less, the shade holds its tone for years.

Does it work outside North America?

Yes — the Alexa is certified for North America, Europe, Australia, and Saudi Arabia, and accepts AC 110 – 240 V universal voltage. Pair the bulb to your local socket standard.

For Trade & Specifiers

Downloads & resources

Specifications PDF · Spec Sheet Installation PDF · Install Guide 3D Files For Specifiers

Zusätzliche Informationen

Gewicht	3 kg

Alexa Wall Lamp

Beschreibung