Platet Outdoor Wall Sconce

Beschreibung

A gooseneck arm, built for weather.

The Platet Outdoor Wall Sconce combines weather-resistant stainless steel and aluminum with a vintage-inspired gooseneck arm and cone shade. This industrial minimalist fixture provides directed downlight, making it perfect for covered patio seating, front porch entryways, or flanking a garage door. Embracing a modern farmhouse aesthetic, its clean architectural silhouette serves as functional outdoor decor for residential backyards and commercial storefronts — a wet-rated hardwired lantern offering durable construction and glare-free illumination for contemporary exterior facades.

One Size

Built to one scale

Outdoor Sconce

The Platet

∅ 7.9″ × W 11.8″ × H 15.7″

DIA 20 × W 30 × H 40 CM

The Make

Two honest materials

Stainless Steel

Weather-resistant stainless steel gooseneck arm, in Rust Color or Black, mounting the fixture to the wall.

Aluminum

Weather-resistant aluminum cone shade, in Black, Green, or Rust Color, directing light downward.

Arm
Finish

Rust Color
Black

Shade
Finish

Black
Green
Rust Color

Good to know

This fixture is IP54 wet-rated for exterior use — it’s built to withstand dust and splashing water from any direction, suitable for covered patios, porches, and other exposed outdoor locations. It’s not rated for full submersion or direct high-pressure water jets. The LED light source is built-in and integrated, so there’s no separate bulb to replace.

The Particulars

Full specification

Materials

Stainless Steel, Aluminum

Arm Finish

Rust Color, Black

Shade Finish

Black, Green, Rust Color

Light Source

Built-in integrated LED

Kelvin Range

Warm Light

IP Rating

IP54 — Wet-Rated for Outdoor Use

Voltage

AC 110 – 240 V

Wiring

Hardwired

Size

∅ 7.9″ × W 11.8″ × H 15.7″ (Dia 20 × W 30 × H 40 cm)

Certification

Listed
North America
CE
SAA
SASO
KC

Frequently Asked

Before you order

How is the Platet installed?

Hardwired onto a standard exterior-rated junction box, by a qualified electrician. Four steps:

Cut power & confirm wiring. Switch off the circuit at your breaker and confirm the junction box is rated for outdoor/wet-location use.
Mount the gooseneck arm. Secure the stainless steel base to the junction box, then match line-to-line, neutral-to-neutral, and ground.
Position the cone shade. Aim the aluminum shade toward your entryway, patio seating, or garage door area for directed downlight.
Restore power. Switch the circuit back on — the LED is built-in, so there’s no bulb to install.

What does the IP54 wet rating actually mean?

IP54 means the fixture is protected against dust and against water splashing from any direction, making it suitable for covered patios, porches, and other exposed outdoor spots. It is not rated for full submersion or direct high-pressure water jets, so avoid locations with standing water or direct hose spray.

Since the LED is built-in, can it be replaced if it burns out?

The Platet uses a built-in integrated LED module rather than a screw-in bulb, so it isn’t user-replaceable the way a standard bulb would be. Integrated LEDs are rated for a long service life under normal use, and the module can be serviced by an electrician if it ever needs attention.

Do the arm and shade need to match?

Not necessarily — the gooseneck arm comes in Rust Color or Black, while the cone shade offers a third option, Green, in addition to Black and Rust Color. Matching arm and shade gives a cohesive, single-tone look, while pairing a Black arm with a Green shade, for example, leans further into the industrial farmhouse character described in the listing.

For Trade & Specifiers

Downloads & resources

Specifications
PDF · Spec Sheet

Installation
PDF · Install Guide

3D Files
For Specifiers

Zusätzliche Informationen

Gewicht	6 kg
Size	Dia 20cm x W 30cm x H 40cm / ∅ 7.9″ x W 11.8″ x H 15.7″
Finishes	Black, Rust Color & Green, Rust Color
Kelvin Range	Warm Light

Platet Outdoor Wall Sconce

Beschreibung