Bonnet Chandelier

Beschreibung

Clean lines, cast in brass.

The Bonnet Chandelier is all about its clean lines and sculptural, mid-century form. It features a minimal frame with brass cone shades that cast a warm, downward glow — a simple yet striking design that adds a perfect touch of modern, sophisticated style to any room.

Two Configurations

Choose your form

2 Lights

The Line

L 54″ × W 11.8″ × H 10.6″

L 137 × W 30 × H 27 CM

4 Lights

The Cluster

L 60″ × W 60″ × H 16″

L 152 × W 152 × H 40.5 CM

The Make

All brass

Brass

A minimal all-brass frame and cone shades, in Brass or Black finish — the fixture’s clean, sculptural silhouette relies on the consistency of a single material throughout.

Finishes

Brass
Black

The Particulars

Full specification

Materials

Brass

Finishes

Brass, Black

Bulb Base

E12 or E14 — bulb not included

Power

Max 15W per bulb

Voltage

AC 110 – 240 V

IP Rating

IP20 — Indoor Use Only

Installation

Hardwired

Suspension Rod

11.8″ + 15.7″ segments (custom lengths available)

Sizes

L 54″ × W 11.8″ × H 10.6″ (L 137 × W 30 × H 27 cm) — 2 Lights
L 60″ × W 60″ × H 16″ (L 152 × W 152 × H 40.5 cm) — 4 Lights

Certification

North America
Europe
Australia
Saudi Arabia

Good to know

The Brass finish will develop a soft patina over time — wipe with a dry, soft cloth only, and avoid ammonia-based or abrasive cleaners, which can dull the finish. The segmented suspension rod (11.8″ + 15.7″) can be combined in different lengths, so plan your final drop height before installation.

Frequently Asked

Before you order

How is the Bonnet Chandelier installed?

Hardwired onto a standard junction box, by a qualified electrician. Four steps:

Cut power & confirm wiring. Switch off the circuit at your breaker and confirm the ceiling box supply matches AC 110 – 240 V.
Set your drop height. Combine the 11.8″ and 15.7″ suspension rod segments to reach your preferred length, or request a custom length before ordering.
Mount the canopy & connect wiring. Secure the ceiling canopy to the junction box, then match line-to-line, neutral-to-neutral, and ground.
Fit the bulbs & restore power. Thread in your E12/E14 bulbs (max 15W each) and switch the circuit back on.

What’s the difference between the 2-Light and 4-Light configurations?

These aren’t just different sizes of the same shape — the 2-Light „Line“ is a linear fixture (54″ long, 11.8″ wide) suited to a rectangular dining table or kitchen island. The 4-Light „Cluster“ is a square configuration (60″ × 60″) designed to center over a round or square table, or to anchor a larger open room from directly above.

What bulbs does it take, and how many do I need?

The Bonnet takes E12 or E14 base bulbs, sold separately, rated to a maximum of 15W each. Bulb count matches the configuration: 2 bulbs for the Line, 4 for the Cluster. A warm-white LED at or under 15W keeps the glow soft through each brass cone shade.

Should I choose the Brass or Black finish?

Brass reads warmer and more traditional, and will develop a soft patina over time. Black gives the same clean, sculptural silhouette a more graphic, modern edge — it tends to read quieter against light walls and pairs easily with mixed-metal hardware elsewhere in the room.

For Trade & Specifiers

Downloads & resources

Specifications
PDF · Spec Sheet

Installation
PDF · Install Guide

3D Files
For Specifiers

Zusätzliche Informationen

Gewicht	10 kg
Size	2-Lights: L 54" x W 11.8" x H 10.6", 4-Lights: L 60" x W 60" x H 16"
Finishes	Brass, Black, Brass & Black

Beschreibung