House Cord Pendant Lamp

Beschreibung

A woven cord, in refined scale.

The House Cord Pendant Lamp reimagines a timeless pendant silhouette in a refined, compact scale. This thoughtfully designed fixture merges contemporary drop-cord functionality with traditional aesthetic sensibilities, creating a fixture that commands attention without overwhelming a space. The shade features double-sided woven fabric construction, while an elegant drop-ball detail adds visual interest and sophistication.

Two Sizes

Choose your scale

1 Light

The Petite Cord

∅ 6.5″ × H 8.7″

DIA 16.5 × H 22 CM

3 Lights

The House Cord

∅ 11.8″ × H 12.8″

DIA 30 × H 32.5 CM

The Make

Two honest materials

Iron

Iron frame and drop-ball detail, finished in Brown, White, or Copper.

Fabric

Double-sided woven fabric shade, in a White finish, diffusing the light softly on both sides.

Body
Finish

Brown White Copper

Shade
Finish

White

The Particulars

Full specification

Materials

Iron, Fabric

Body Finish

Brown, White, Copper

Shade Finish

White

Bulb Base

E12 or E14 — bulb not included

Power

Max 15W per bulb

Voltage

AC 110 – 240 V

IP Rating

IP20 — Indoor Use Only

Installation

Hardwired

Hanging Wire

59″ standard (custom lengths available)

Size

∅ 6.5″ × H 8.7″ (Dia 16.5 × H 22 cm) · ∅ 11.8″ × H 12.8″ (Dia 30 × H 32.5 cm)

Certification

North America Europe Australia Saudi Arabia

Good to know

The woven fabric shade is double-sided, so it looks finished from every angle — spot-clean gently with a dry, soft brush; avoid water or wet cleaning, which can distort the weave. Wipe the iron body with a dry cloth only, avoiding ammonia-based or abrasive cleaners.

Frequently Asked

Before you order

How is the House Cord installed?

Hardwired onto a standard junction box, by a qualified electrician. Four steps:

Cut power & confirm wiring. Switch off the circuit at your breaker and confirm the ceiling box supply matches AC 110 – 240 V.
Set your drop. The standard hanging wire is 59″; custom lengths are available if you need a different drop.
Mount the canopy. Secure the base to the junction box, then match line-to-line, neutral-to-neutral, and ground.
Fit the bulbs & restore power. Thread in your E12/E14 bulbs (max 15W each) and switch the circuit back on.

What’s the difference between the two sizes?

The Petite Cord is a single-light version at ∅ 6.5″ × H 8.7″, suited to smaller nooks, bedside pairs, or tight ceiling clearances. The House Cord is the 3-light version at ∅ 11.8″ × H 12.8″, better suited as a standalone statement over an island or entry table.

What’s the difference between the Body Finish and Shade Finish?

„Body Finish“ is the iron frame and drop-ball detail, offered in Brown, White, or Copper. „Shade Finish“ is the woven fabric shade, which comes in White only. You’re choosing the metal tone against a fixed white fabric shade — Copper or Brown reads warmer, while White gives a quieter, monochrome look.

What bulbs does it take, and how many do I need?

The House Cord takes E12 or E14 base bulbs, sold separately, rated to a maximum of 15W each. This fixture uses 3 bulbs. A warm-white LED at or under 15W keeps the glow soft and even through the double-sided woven fabric shade.

What does „double-sided woven fabric“ mean for the shade?

The shade is woven with a finished surface on both the inside and outside, rather than a raw or unfinished interior. That means the fixture looks intentional and tailored from any viewing angle — useful over an island, breakfast nook, or entryway where the underside of the shade is visible from below.

For Trade & Specifiers

Downloads & resources

Specifications PDF · Spec Sheet Installation PDF · Install Guide 3D Files For Specifiers

Zusätzliche Informationen

Gewicht	3 kg
Size	1-Light Dia 16.5cm x H 22cm / ∅ 6.5″ x H 8.7″, 3-Lights Dia 30cm x H 32.5cm / ∅ 11.8″ x H 12.8″
Finishes	Brown, White

Beschreibung