Water Ripples Ceiling Light

Beschreibung

Light, cast in ripples.

The Water Ripples Ceiling Light is crafted from premium acrylic, its surface worked into a mesmerizing ripple pattern that diffuses light beautifully throughout the room. The dynamic, wave-like texture creates visual depth on the ceiling itself, giving a flush-mount fixture the presence of a sculptural piece — a fitting choice for modern interiors that want both ambient light and a quiet design statement overhead.

Three Scales

Choose your spread

4 Lights

The Ripple

∅ 15.7″ × H 5.5″

DIA 40 × H 14 CM

6 Lights

The Wave

∅ 19.7″ × H 5.5″

DIA 50 × H 14 CM

8 Lights

The Tide

∅ 23.6″ × H 5.5″

DIA 60 × H 14 CM

The Make

Two honest materials

Iron

Durable iron mounting frame securing the fixture flush to the ceiling.

Acrylic

Ripple-textured acrylic diffuser shade, in a clear finish, spreading light evenly across the surface.

Finish

Clear

The Particulars

Full specification

Materials

Iron, Acrylic

Finish

Clear

Bulb Base

E12 or E14 — bulb not included

Power

Max 15W per bulb

Voltage

AC 110 – 240 V

IP Rating

IP20 — Indoor Use Only

Installation

Hardwired

Sizes

∅ 15.7″ × H 5.5″ (Dia 40 × H 14 cm) — 4 Lights
∅ 19.7″ × H 5.5″ (Dia 50 × H 14 cm) — 6 Lights
∅ 23.6″ × H 5.5″ (Dia 60 × H 14 cm) — 8 Lights

Certification

North America
Europe
Australia
Saudi Arabia

Good to know

IP20-rated for dry, indoor rooms only — avoid installing over a bathtub, shower, or other damp/wet location. Wipe the acrylic diffuser with a dry microfibre cloth only; avoid solvents or abrasive cleaners, which can scratch the ripple texture and dull its clarity.

Frequently Asked

Before you order

How is the Water Ripples installed?

Hardwired onto a standard junction box, by a qualified electrician. Four steps:

Cut power & confirm wiring. Switch off the circuit at your breaker and confirm the ceiling box supply matches AC 110 – 240 V.
Mount the iron frame. Secure the base to the junction box, then match line-to-line, neutral-to-neutral, and ground.
Fit the bulbs. Thread in your E12 or E14 bulbs, max 15W each, before closing up the fixture.
Attach the acrylic shade & restore power. Fit the ripple-textured diffuser to the frame and switch the circuit back on.

What bulbs does it take, and how many do I need?

The Water Ripples takes E12 or E14 base bulbs, sold separately, rated to a maximum of 15W each. Bulb count matches the fixture: 4 bulbs for the 4-Light size, 6 for the 6-Light, and 8 for the 8-Light. A warm-white LED at or under the 15W cap gives the most even glow through the ripple pattern.

Can this be installed in a bathroom?

No — this fixture is IP20-rated, meaning it’s built for dry indoor rooms only. It isn’t suitable for bathrooms, shower enclosures, or any space with direct moisture or humidity exposure. It works well in living rooms, bedrooms, hallways, dining rooms, and similar dry spaces.

Which size should I choose for my room?

All three share the same 5.5″ ceiling drop, so the choice comes down to floor area and desired brightness. The 4-Light (∅15.7″) suits bedrooms, hallways, and smaller rooms. The 6-Light (∅19.7″) is a good mid-size living or dining room fit. The 8-Light (∅23.6″) throws the most light and reads as a focal point in larger open-plan rooms.

For Trade & Specifiers

Downloads & resources

Specifications
PDF · Spec Sheet

Installation
PDF · Install Guide

3D Files
For Specifiers

Zusätzliche Informationen

Gewicht	3 kg
Size	4-Lights Dia 40cm x H 14cm / ∅ 15.7″ x H 5.5″, 6-Lights Dia 50cm x H 14cm / ∅ 19.7″ x H 5.5″, 8-Lights Dia 60cm x H 14cm / ∅ 23.6″ x H 5.5″
Finishes	Clear

Water Ripples Ceiling Light

Beschreibung